/

Smartxchoices 858d Digital Soldering Station Hot Air Rework Station Smd Desoldering Welder W/accessories (858d)

Features: 1. Comfortable and portable handheld and the Digital LED display. 2. Adjust the air flow and temperature control keypad. 3. Refer to the instructions included with three kinds of nozzles (big,medium and small) replacement part. 4. Intelligent system that could alarm, Fault detection automatically. 5. Automatic cooling function of the system will prolong the life of heating element, and protect the hot air gun. Operation Instruction: 1. To put the unsoldering equipment ready, and leave handle on the holder 2. To connect the power 3. To set the blast nozzle (large caliber nozzle preferred). 4. To switch on the power, the screen display"-",it represents standby model (Available in microcomputer with digital LED) 5.  ...

$38.99

/

Yihua 858d Soldering Rework Station Hot Air Gun Smd Rework Station 110v 600w With Led Digital Displays + 3 Nozzles (yihua 858d),.

Instruction: 1. Put the unsoldering equipment ready, and leave handle on the holder 2. Connect the power 3. Set the blast nozzle (large caliber nozzle preferred). 4. Switch on the power, the screen display"-", it represents standby model (Available in microcomputer with digital LED) 5. Press▲or▼ button (revolving switch)as to set up the temperature. (Available in microcomputer with digital LED) 6. Turn the temperature switch as to set up the required temperature. (Available in luminous discharge tube display indication 7. Hold the handle, so the equipment begins to heat. Adjust the revolving switch of airflow in order to select suitable airflow, and begin to operate normally while the temperature is table.  ...

$48.99

/

Yihua 858d Soldering Rework Station Hot Air Gun Smd Rework Station 110v 600w With Led Digital Displays + 3 Nozzles (yihua 858d),.

Instruction: 1. Put the unsoldering equipment ready, and leave handle on the holder 2. Connect the power 3. Set the blast nozzle (large caliber nozzle preferred). 4. Switch on the power, the screen display"-", it represents standby model (Available in microcomputer with digital LED) 5. Press▲or▼ button (revolving switch)as to set up the temperature. (Available in microcomputer with digital LED) 6. Turn the temperature switch as to set up the required temperature. (Available in luminous discharge tube display indication 7. Hold the handle, so the equipment begins to heat. Adjust the revolving switch of airflow in order to select suitable airflow, and begin to operate normally while the temperature is table.  ...

$48.99

/

Portable Handheld Gun Desoldering Tool For 858 858d 868 898 Hot Air Station

Description :Portable Handheld Gun Desoldering Tool for 858 858D 868 898 Hot Air Station Features :Brushless fan with long life time.Low noise , soft airflow, even temperature, suitable for lead free soldering and desoldering.The handle is equipped with sensor switch, as long as the grip handle, the system can quickly enter the working mode; handle back into the handle frame, the system will enter standby mode, real-time operating convenience.Particularly suitable for desoldering sensitive components and for soft air rework.Plug pin quantity: 8 female pins.If the plug of your hot air station is different from it but shares the parameters, you can connect the cable again by yourself according to the detailed instructions.Built-in position sensor, suitable for Hakko850 hot air station  ...

$23.15

/

Tek Motion 858d Smd Soldering Rework Station With Led Display, Hot Air Gun & Brushless Fan

Specifications Item Type:Iron Solder Stations Input Voltage: 110V 60Hz Power Consumption: 700W Temperature Stability:±1°C Temperature Range: 212-932°F/100-500°C Noise:   ...

$42.79

/

700w Hot Air Gun Handle For Saike Rework Soldering Station 858d

Description : 700W Hot Air Gun Handle for Saike Rework Soldering Station 858D 852D+ 898D etc Specification : Brand Name : Saike Power Input : 110V - 220V are all compatiable. Power Consumption : 700W This hot air gun handle replacement is compatible with Saike 852D+ 858D and 898D, and other Saike hot air desoldering stations. Package includes : 1 x 700W Hot Air Gun Handle

$28.60

/

Tek Motion 858d Smd Soldering Rework Station With Led Display, Hot Air Gun & Brushless Fan

Package Includes: 1x Rework Station 1x Holder 1x Hot Air Gun 3x Nozzles 1x Manual Specifications: Input Voltage: 110V 60Hz Power Consumption: 700W Temperature Stability:±1°C Air Flow Type: Brushless fan Air Flow Volume: Max. 120L/min Temperature Range: 212-932°F/100-500°C

$48.99

/

Tek Motion 858d Smd Soldering Rework Station With Led Display, Hot Air Gun & Brushless Fan

Package Includes: 1x Rework Station 1x Holder 1x Hot Air Gun 3x Nozzles 1x Manual Specifications: Input Voltage: 110V 60Hz Power Consumption: 700W Temperature Stability:±1°C Air Flow Type: Brushless fan Air Flow Volume: Max. 120L/min Temperature Range: 212-932°F/100-500°C

$45.99

/

Zeny 858d Hot Air Gun Rework Station Smd Solder Soldering Digital 3 Nozzles

Note: Please read the manual careful before use the item. Operation Instruction: 1. To put the unsoldering equipment ready, and leave handle on the holder 2. To connect the power 3. To set the blast nozzle (large caliber nozzle preferred). 4. To switch on the power, the screen display"-",it represents standby model (Available in microcomputer with digital LED) 5. To press▲or▼ button (revolving switch )as to set up the temperature. (Available in microcomputer with digital LED) 6. To turn the temperature switch as to set up the required temperature. (Available in luminous discharge tube display indication 7. To hold the handle, so the equipment begin to heat. To adjust the revolving switch of airflow in order to select suitable airflow,  ...

$39.59

/

Wep 858d (110v) Hot Air Rework Soldering Station, Suitable For Smd, Soic, Chip, Qfp, Plcc, Bga

Overview WEP 858D (110V Version), same as Atten AT858D, has exquisite dimensions and many excellent features. Airflow is strong and mild but with low noise. Temperature is very easy and convenient to adjust through the knobs. Very energy-saving .The hot gun has PIR sensor. Once it's hold, AT858D will go to work mode soon. And once hand off, it will go back to rest mode. Ideal for safe demolition solder QFP, PLCC, SOP, BGA and other chips and components which are temperature-sensitive. Instruction 1. To put the unsoldering equipment ready, and leave handle on the holder 2. To connect the power 3. To set the blast nozzle (large caliber nozzle preferred). 4. To switch on the power, the screen display"-",it represents standby  ...

$51.48

/

Wep 858d (110v) Hot Air Rework Soldering Station, Suitable For Smd, Soic, Chip, Qfp, Plcc, Bga

Overview WEP 858D (110V Version), same as Atten AT858D, has exquisite dimensions and many excellent features. Airflow is strong and mild but with low noise. Temperature is very easy and convenient to adjust through the knobs. Very energy-saving .The hot gun has PIR sensor. Once it's hold, AT858D will go to work mode soon. And once hand off, it will go back to rest mode. Ideal for safe demolition solder QFP, PLCC, SOP, BGA and other chips and components which are temperature-sensitive. Instruction 1. To put the unsoldering equipment ready, and leave handle on the holder 2. To connect the power 3. To set the blast nozzle (large caliber nozzle preferred). 4. To switch on the power, the screen display"-",it represents standby  ...

$49.99

/

Kohree 110v Led Digital 858d Smd Hot Air Rework Station Solder Blower Heat Gun

Specifications 1. Output power: 700W 2. Temperature range: 100 ℃ to 450 ℃ 3. Noise:   ...

$55.98

/

Kohree 110v Led Digital 858d Smd Hot Air Rework Station Solder Blower Heat Gun

Specifications 1. Output power: 700W 2. Temperature range: 100 ℃ to 450 ℃ 3. Noise:   ...

$55.98

/

Targetevo Hot Air Rework Station Heat Gun 110v Led Display 858d Smd Solder Blower

Specifications Output power: 700W Temperature range: 100 to 450 C / 212 to 842 F Noise:   ...

$49.99

/

Kohree 110v Led Digital 858d Smd Hot Air Rework Station Solder Blower Heat Gun

Specifications 1. Output power: 700W 2. Temperature range: 100 ℃ to 450 ℃ 3. Noise:   ...

$55.98

/

Kohree 110v Led Digital 858d Smd Hot Air Rework Station Solder Blower Heat Gun

Specifications 1. Output power: 700W 2. Temperature range: 100 ℃ to 450 ℃ 3. Noise:   ...

$55.98

/

Wep 858d (110v) Hot Air Rework Soldering Station, Suitable For Smd, Soic, Chip, Qfp, Plcc, Bga

Overview WEP 858D (110V Version), same as Atten AT858D, has exquisite dimensions and many excellent features. Airflow is strong and mild but with low noise. Temperature is very easy and convenient to adjust through the knobs. Very energy-saving .The hot gun has PIR sensor. Once it's hold, AT858D will go to work mode soon. And once hand off, it will go back to rest mode. Ideal for safe demolition solder QFP, PLCC, SOP, BGA and other chips and components which are temperature-sensitive. Instruction 1. To put the unsoldering equipment ready, and leave handle on the holder 2. To connect the power 3. To set the blast nozzle (large caliber nozzle preferred). 4. To switch on the power, the screen display"-",it represents standby  ...

$51.69

/

Wep 858d (110v) Hot Air Rework Soldering Station, Suitable For Smd, Soic, Chip, Qfp, Plcc, Bga

WEP 858D (110V Version), same as Atten AT858D, has exquisite dimensions and many excellent features. Airflow is strong and mild but with low noise. Temperature is very easy and convenient to adjust through the knobs. Very energy-saving .The hot gun has PIR sensor. Once it's hold, AT858D will go to work mode soon. And once hand off, it will go back to rest mode. Ideal for safe demolition solder QFP, PLCC, SOP, BGA and other chips and components which are temperature-sensitive. Instruction 1. To put the unsoldering equipment ready, and leave handle on the holder 2. To connect the power 3. To set the blast nozzle (large caliber nozzle preferred). 4.  ...

$57.99

/

Yaogong 858d Smd Hot Air Gun Rework Station Digital Solder 4nozzles 110v 700w

Specifications: - Size: 4 "x 5.4" x 6 "(15 x 10 x 13.8 cm) - Weight: 1.8kg - Operating voltage: 110V - Output power: 700W - Air flow: 120 liters per minute (max) - Temperature range: 100 ℃ -450 ℃ - shows the type of miniature digital LED (resolution: 1 ℃) - Handle length (including handle rope): 120 cm - Model: Microcomputer digital LED instructions - Type of pump air: Airflow fan with soft air - suitable for a variety of components such as demolition welding, such as: SOIC, CHIP, QFP, PLCC, BGA, etc. (special variable for mobile phone cable and cable dismantling) - for heat shrink, drying, in addition to paint, in addition to sticky, thawing, preheating Note: Try  ...

$43.99

/

Bephamart 6pcs 3/5/6/8/10/12mm Circular Nozzles For Hot Air Soldering Station 858a 858d

Description: 6Pcs 3/5/6/8/10/12mm Circular Nozzles For Hot Air Soldering Station 858A 858D Suitable for a variety of hot air rework station, the installation is very firm, and very easy to replace. It doesn't fit to the handheld heat soldering station. Outer Diameter: 3mm 5mm 6mm 8mm 10mm 12mm Package Included: 6 x 858A 858D Circular Nozzles Details pictures:

$11.06

858d Products | Other Products

More Buying Choices